APC NetBotz Rack Access Pod 170 (For Chatsworth GlobalFrame Rack)

Part Number: NBPD0172
Availability:

Out of stock


$1,695.84 inc. GST

Out of stock

Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Audible alarms
Provide notification of changing flywheel conditions

InfraStruXure Central compatible
Enables centralized management via APC InfraStruXure® Central.

SmartSlot
Customize UPS capabilities with management cards.

Cold-start capable
Provides temporary battery power when the utility power is out.

Serial Connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC’s Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.

Resettable circuit breakers
Enables a quick recovery from overload events.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Audible alarms
Provides notification of changing utility power and UPS conditions.

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

Serial Connectivity
Provides management of the UPS via a serial port.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.

Network manageable
Provides remote management of the UPS over the network.

Adjustable voltage sensitivity
Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications.

Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.

SKU: NBPD0172 Category: Brand:
FeatureFeature Value
UPS topologyLine-Interactive
WaveformSine
Input operation voltage (min)151 V
Input operation voltage (max)302 V
Input frequency50/60 Hz
Output operation voltage (min)220 V
Output operation voltage (max)240 V
Automatic Voltage Regulation (AVR)Y
Surge energy rating459 J
Hold time (max)2 ms
Efficiency98.6%
Emergency Power Off (EPO)O
Noise level46 dB
Surge protectionY
Audible alarm(s)Y
Auto-restartY
AC outlet typesC13 coupler
Power plugC14 coupler
AC outlets quantity4 AC outlet(s)
Number of output IEC jumpers2
USB portY
Serial interfaceY
Serial interface typeRJ-45
SmartSlotY
Battery technologySealed Lead Acid (VRLA)
Battery capacity432 VAh
Typical backup time at full load7.2 min
Typical backup time at half load25.8 min
Battery life (max)6 year(s)
Battery recharge time3 h
Hot-swap batteryY
Automatic battery testY
Cold startY
Form factorRackmount
Product colourBlack
Rack capacity2U
LED indicatorsStatus
Energy Star certifiedY
RoHS complianceY
CertificationCE, CSA, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, TUV, VDE, REACH, PEP, EOLI
Operating temperature (T-T)0 – 40 °C
Storage temperature (T-T)-15 – 45 °C
Operating relative humidity (H-H)0 – 95%
Storage relative humidity (H-H)0 – 95%
Operating altitude0 – 3000 m
Non-operating altitude0 – 15000 m
Width432 mm
Depth457 mm
Height86 mm
Weight28.6 kg
Rack mount kitY
Cables includedRS-232,USB cable
Quick installation guideY
Software CDY
Package width594 mm
Package depth603 mm
Package height251 mm
Package weight31.9 kg
Quantity per pallet8 pc(s)
Nominal output voltage230 V
Nominal input voltage230 V